8 CNC Engraving Tips for Beginners
In the manufacturing industry, CNC turning machines are widely used for the efficiency, consistency, and accuracy they provide, which is nearly impossible to achieve manually. Manufacturing operations in a CNC…
In the manufacturing industry, CNC turning machines are widely used for the efficiency, consistency, and accuracy they provide, which is nearly impossible to achieve manually. Manufacturing operations in a CNC…
An edge break is a common practice when fabricating a component. Moreover, it reduces the sharpness of the edge of a component by material removal. In this article, you will…
A pipe thread size chart allows engineers and other technical professionals to quickly determine mating suitability in a male-female connection. Moreover, these charts are according to industry standards and various…
Fender washers and flat washers are both common types of plain washers. As a result, engineers often need to select which of them is the best fit on an application-by-application…
6G is a pipe welding position where the longitudinal axis of a pipe is fixed at about 45° to the horizontal axis, vertical axis, or relative to another pipe. As…
5g welding position entails welding a pip that is in a horizontal orientation with one or both ends fixed. As a result, the operator must travel either upwards or downwards…
When steel undergoes a manufacturing process that coats it with zinc, it is referred to as galvanized steel. Although this provides the steel with a glossy and appealing look, the…
Black steel at a material level is Steel that has not been galvanized. It provides a version of carbon steel with a dark-colored iron oxide exterior. This exterior protects against…
Many industries, including electronics, aerospace, and telecommunications, rely heavily on conductive metals. Some metals are more conductive than others, although most metals do conduct heat and electricity to some extent….
A butt weld joins two pieces that are on the same plane vs a fillet weld that joins workpieces that are perpendicular or at an angle. To a layperson, they…